SIDOOR ATD410W machine tool door drive

The SIDOOR ATD410W machine tool door drive can be used to operate horizontal sliding doors. The drive system has been specifically designed for use in a very wide range of machine tools. The communication-capable ATD410W controller offers complete flexibility for integration with a machine tool via the USS protocol (universal serial interface protocol).

• For dynamic door weights up to 600 kg
• USS module design: USS communications interface for connection to ET 200-type higher-level controllers, SIMATIC S7?1200, SIMATIC S7?1500 and SIMATIC S7?300 via USS interface
• 5 freely parameterizable digital inputs for signal acquisition, of which one input is optionally parameterizable for:
  • Connection of a light barrier as type 2 ESPE (electro-sensitive protective equipment) according to EN 61496-1
  • Connection of a pressure-sensitive edge according to ISO 13856-22, relay contacts for additional position signals
• Automatic determination of the door weight and friction during the learn run
• Operating temperature -20 to +50 °C
• Flexible motor management, i.e. automatic recognition of the geared motor
• Assisted drive (motor-assisted movement of the door)
• Impulse stop (door stopped automatically by applying light force)
• Impulse drive (automatic door movement by applying light force)
• Opening width 0.3 to 5 m
• Auxiliary voltage output 24 V DC ± 15 %; 0.4 A (short-circuit-proof)
• Output stage for the motor control short-circuit-proof
• Displays the current operating states on a 7-segment display directly on the controller or with the Software Kit or Service Tool
• All door parameters can be assigned via the PROFIdrive profile with the function block provided. For details, see the System Manual "SIDOOR AT40, ATD400V, ATD400K, ATD400W, ATD410W, ATD400S, ATE250S",