商铺名称：午虎特种合金（上海）有限公司
联系人：蔡玉兰（小姐）
联系手机：
固定电话：
企业邮箱：18117348636@163.com
联系地址：泗砖路600号
邮编：200000
联系我时，请说是在焊材网上看到的，谢谢！
NILOR CF36 焊丝
NILO CF36 焊丝主要用于NILO 36合金的熔化极气体保护焊、钨极气体保护焊和埋弧焊。NILO CF36 焊丝与NILO 36合金一样具有较低的热胀特性，这防止的了凝固裂纹和再热裂纹的产生。当这种焊丝用于喷射过渡的GMAW焊接过程时，推荐使用氩气作为保护气体；当用于GMAW脉冲焊接和短弧焊接时，推荐使用氩气和25％氦气混合气体作保护气；当用于SAW焊接时应当使用INCOFLUX 6焊剂。
|
规格 无
|
|
典型化学 Ni…………..36 成分 Fe………..…62 C…………...0.2 Mn…………0.4 Nb…….…...1.6
|
|
典型机械 拉伸强度，psi 80,000 性能 Mpa 550 屈服强度（0.2％偏移量），psi 60,000 Mpa 414 延伸率，(4d)% 25 冲击强度（ft-lbs） 41 （70oF）（Joules） 56
|
|
产品供货形态 |
|
线卷状焊丝直径：0.045” 直焊丝直径：3／32” |
直焊丝的长度为：915mm(36”)或1000mm(39”)
NILO CF36 welding wire is mainly used for the welding of the melting electrode of NILO 36 alloy, the welding of tungsten electrode gas and the submerged arc welding. The NILO CF36 electrode has a low thermal expansion property as the NILO 36 alloy, which prevents the production of solidified cracks and reheat cracks. When this wire is used for the GMAW welding process of spray transition, argon is recommended to protect the gas. When used for GMAW pulse welding and short arc welding, it is recommended to use argon gas and 25% helium mixture to protect gas. INCOFLUX 6 flux shall be used when used for SAW welding.
Specifications without
Typical chemical Ni... ... 36
Element Fe......... ... ... 62
C............ ... 0.2
Mn............ 0.4
Nb... .... ... 1.6
Typical mechanical tensile strength, psi 80,000
Properties of 550 Mpa
Yield strength (0.2% offset), psi 60,000
414 Mpa
Extension, (4d)% 25
The impact strength (ft-lbs) 41
(70 of) (Joules) 56
Product form
Diameter of wire coil wire: 0.045 "straight wire diameter: 3/32"
The length of straight wire is: 915mm(36 ") or 1000mm(39 ").
