邯郸西林牌平台车经销商
邯郸西林牌平台车经销商
产品价格:¥1(人民币)
  • 规格:1
  • 发货地:石家庄
  • 品牌:
  • 最小起订量:11
  • 免费会员
    会员级别:试用会员
    认证类型:企业认证
    企业证件:通过认证

    商铺名称:河北骏豪机械设备有限责任公司

    联系人:张帅(先生)

    联系手机:

    固定电话:

    企业邮箱:2067778308@qq.com

    联系地址:河北省石家庄市长安区胜利北街219号花中锦五金机电市场274-275号

    邮编:50000

    联系我时,请说是在焊材网上看到的,谢谢!

    商品详情

      河北骏豪机械设备有限责任公司

      联系人:张经理13933000298

      越障碍搬运车,主要用于搬运路程中跨越障碍的搬运作业,这种搬运车可以轻松跨越障碍,不会伤害到搬运车且操作简单;手动液压搬运车特性:油泵为整体密封式,关键部件采用德国进口原件,有过载保护,根除漏油的弊病,大小活塞杆镀铬结构牢固,有过载保护,下降速度控制 ,阀芯采用整体件,有别于分散零件,便于维修,从而使该车更适应市场需求。
      The obstacles of transport vehicles, mainly used for transporting distance of obstacle handling operation, the truck can easily cross the barrier, will not hurt the car and the operation is simple; hydraulic manual handling car features: pump for whole sealed, key parts imported from Germany, the original, overload protection, oil spill eradicate ills, the size of the piston rod chrome solid structure, overload protection, speed control valve decreased, the whole thing, is different from the scattered parts, convenient maintenance, so that the car is more adapt to the market demand.
      人生路上,可能春风得意,也可能坎坷不平,无论如何,我们都要一直走下去。荣耀也罢,艰难也罢,都要以平和的心态去面对,少一些无奈与感慨,多一份从容和淡然。把心放平,生活就是一泓平静的水;把心放轻,人生就是一朵自在的云。
       
      人生如梦,梦却不随人愿。不是逆来顺受,而是心甘情愿,淡然的心态,是一种成熟,平和的心境,是一种从容。很多时候,面对,不一定最难过;孤独,不一定不快乐;得到,不一定能长久。珍惜拥有,才能用心生活;坚持不懈,才能超越自己。但愿梦想和生命一起精彩。
      选择货叉的宽度取决于日常使用托盘的尺寸, 一般的手动液压车标准尺寸分宽车和窄车,宽车685*1200mm,窄车 540*1150mm。
      载重
      一般来讲,国际标准的有2.0t-2.5吨-3.0t-5.0t,这4种载重量。
      width
      The width of the selection fork depends on the size of the pallet used, the average hand hydraulic car, the standard size, the width and width of the car, the width of the car, the 685*1200mm, the narrow car 540*1150mm.
      load
      Generally speaking, the international standard has 2.0t-2.5 tons, -3.0t-5.0t, these 4 carrying capacity.


      一般好一点的3.0t的车采用的是4mm钢板,而差一些的钢板厚度加上油漆厚度都达不到4mm,有的甚至只能达到3mm,这样偷工减料换来的价格优势,对消费者是很不付责任的。这样的车容易在后续的使用中出现故障。另外,标准型的5.0t的手动液压车钢板厚度也要达到8mm以上,否则很难承受如此自重。
      Plate thickness
      A good general 3.0T car adopts 4mm steel, and some of the thickness of the steel plate with the thickness of the paint is not up to the 4mm, some even can only reach 3mm, so Jerry in exchange for the price advantage, it is irresponsible to consumers. Such a car is prone to malfunction in subsequent use. In addition, the standard 5.0t manual hydraulic car, steel plate thickness should reach more than 8mm, otherwise it is difficult to bear such self-respect.


      风帆,不挂在桅杆上,是一块无用的布;桅杆,不挂上风帆,是一根平常的柱;理想,不付诸行动是虚无缥缈的雾;行动,而没有理想,是徒走没有尽头的路。只有行动,才能抚平梦想带来的躁动不安。只有坚持,才能最终走向你想要登及的彼岸。若想成功,必须坚持。有梦的岁月,就让生命之灯,因热情而点燃;梦想之舟,因努力而扬帆远航。
      手动液压车轮子材料要根据作业地面的状况来选择。地面状况平滑的可以选择尼龙轮子,因为尼龙的轮子相对比较便宜,而且拉着也比较省力。地面状况不好的,可以选择铝合金加聚氨酯的轮子,它们比较耐磨。如果不想太伤地面,比如工厂有些是地坪的地面,最好不要用尼龙的轮子,应该选用聚氨酯的。因为尼龙的太硬了,聚氨酯相对来说比较软一点。
      Wheel material
      Manual hydraulic car wheel material according to the situation of the ground to choose. The ground condition is smooth, you can choose nylon wheel, because nylon wheel is relatively cheap, and pulling is also more labor-saving. The ground condition is bad, you can choose aluminum alloy plus polyurethane wheels, they are more wear-resistant. If you do not want to hurt the ground too, such as factories, some ground floor, it is best not to use nylon wheels, polyurethane should be used. Because nylon is too hard, polyurethane is a little softer.

    在线询盘/留言
  • 0571-87774297