临汾10/8ST-AH尾矿渣浆泵有现货@10/8ST-AH尾矿渣浆泵

就必须及时调整叶轮与前护板的间隙，金属内衬泵叶轮与前护板间隙在之间，橡胶内衬泵叶轮与前后护套之间的间隙是相等的。调节叶轮间隙时首先要停泵，松开压紧轴承组件的螺栓，拧紧调整螺栓上的螺母，使轴承组件向前移动，同时用手传动轴按泵传动方向旋转直到叶轮与前护板摩擦为止对于金属内衬泵则将前面刚拧紧的螺母放松半圈，然后将调整螺栓上前面的螺母拧紧，使轴承组件后移此时叶轮与前护板间隙在之间。为了渣浆泵的运行对于橡胶内衬泵则通过拧调整螺栓上的螺母综上所述是关于渣浆泵叶轮的调节，渣浆泵的叶轮是渣浆泵运行工作中重要的元件,如果叶轮发生故障磨损将直接影响到水泵的工作。

临汾10/8ST-AH尾矿渣浆泵有现货@10/8ST-AH尾矿渣浆泵渣浆泵运行中，要注意填料压盖部位的温度和渗漏。正常的填料渗漏应不超过每分钟10-20滴。huiquanjdzj

Shaft seal(seal): The shaft seal type of the pump has packing seal, cover impeller seal, mechanical seal.
Transmission: There are V-type triangular belt transmission, elastic coupling transmission, gear gearbox transmission, hydraulic coupling transmission, frequency conversion drive device, Silicon controllable speed adjustment and so on. Among them, the V-type triangular belt drive has CL, CV, CR, ZL, ZV, and ZR transmissions.
Overall performance: wide range of pump performance, cavitation performance, high efficiency. Multistage tandem technology can be used for long-distance transportation. There are a variety of metals available for the flow parts and the depth is increased. With various speeds and variations, the pump is operated under good engineering. Long service life, high operating efficiency, can be many kinds of poor transportation conditions.

临汾10/8ST-AH尾矿渣浆泵有现货@10/8ST-AH尾矿渣浆泵轴承组件：泵的轴承组件采用圆筒式结构，便于叶轮与前护板的间隙，时可整体拆出。轴承采用油脂。