品牌：JK

产品特性：双回转马达

产品别名：JK593G潜孔钻车

适用范围：光伏发电站桩基钻孔

凿孔直径：90-350mm

凿孔深度：50m

凿孔速度：1200mm\/min

冲击能量：900

冲击频率：45Hz

规格：JK593G潜孔钻机

可售卖地：全国

型号：JK593G潜孔钻机

JK593G爆破光伏钻孔履带式多功能钻机

JK593G爆破光伏钻孔履带式多功能钻机，结构优化，进尺，设计更人性化。采用柴油发动机一液压油泵组为动力装置，由液压马达实现钻机回转、推进、提升、行走及液压油缸摆角定位等辅助动作。

JK593G履带式液压潜孔钻机主要用于光伏、水电工程，露天采矿，道路修建，工程的钻凿爆破孔作业。

?

JK593G is a dual - purpose driling rig for blasting holes and photovoltaic holes . The structure is fuly optimized , the footage cost is lower , and the design is more user - friendly . The diesel engine - hydraulic oil pump set is used as the power device , and the auxiliary actions of the driling rig such as rotation , feeding , lifting , walking and hydraulic cylinder swing angle positioning are realized by the hydraulic motor .

JK593G crawler mounted hydraulic down - the - hole driling rig is mainly used for driling and blasting holes in photovoltaic , hydropower projects , open - pit mining ,Г oad construction , and national defense projects .

?

?

01、回转机 Rotation unit

型回转箱体，双马达回转，回转扭矩更大，且可实现回转速度双速调节，设有转速切换，两档转速快速切换，以便钻机适用不同工况。带减震器接头，运行更平稳，故障率，降低了日常维护松散层不易卡钻，成孔。

进口回转密封件，密封性好、寿命长。

?The reinforced rotation unit has dual motors , which brings greater rotation torque and can realize two - speed adjustment of rotation speed . Equipped with a speed switching valve , the two - speed speed can be quickly switched , so that the drilling rig can be used in different working conditions . With a shock absorber joint , the operation is more stable , the failure rate is lower , and the daily maintenance cost is reduced , besides , the loose layer is not easy to get stuck so as to realize higher hole formation rate .

?Imported rotary seals have good sealing performance and long service life .

?

02、动力装置 Power train

进口液压油泵、液压，耐压高，排量大，质量，寿命长。

潍柴74KW增压发动机，柴油机配置满足阶段排放标准。动力强劲，易维护保养。

两级空气滤清装置，确保发动机吸入洁净空气，。

油水一体散热器，在高温环境下，发动机和液压系统正常工作。

?

? ?Imported hydraulic oil pump has high pressure resistance , large displacement , more reliable quality and long life .

?Weichai 74KW engine configuration meets Phase Ill emission standards , it is powerful and easy to maintain .

?The two - stage air filter device ensures that the engine sucks in clean air , which is safe and reliable .

?The oil - water integrated radiator ensures the normal operation of the engine and hydraulic system in a high temperature environment .

?

?

03、免维护推进机构 Maintenance - free feed mechanism

液压机械双重锁定，液压马达的大扭矩稳定输出，自动机械锁定，防止下滑，二者结合，使用寿命长。

技术更，不需要日常油维护。

?The hydraulic and mechanical double lock not only ensures the stable output of the large torque of the hydraulic motor , but also greatly imp Г oves the service life than the worm and gear . The mechanical lock also prevents hydraulic leakage and prevents sliding . The combination of the two , each takes its own strengths .

?The technology is more advanced which does not require daily refueling and maintenance .

?

04、操纵台 Control panel

操纵集中布置，便于钻机的各项操作控制。液压操作系统，，操作简单，维护低。视野更宽，操纵更安全，适合工地的不同使用情况，设计更加安全化、人性化。

快速推进及提升操作，减少辅助时间，提。推进力大小可根据钻进需要随时调节。

?The control valves are centraly arranged to facilitate the operation and control of the drilling rig . Hydraulic operating system , reliable performance , simple operation and low maintenance cost . Wider field of vision , safer manipulation , suitable for different use situations on the construction ste , and more secure and user - friendly design .

?Quickly feeding and lifting operations , reduce auxiliary time and improve efficiency . The feeding force can be adjusted at any time according to the drilling needs .

?

05、底盘系统Maintenance - free undercarriage

加长底盘，重心降低，稳定性好。

大扭矩行走马达，爬坡能力强，行走速度快，同时配有双速行走系统，节省移位时间。

装配行走平衡系统，履帯架前后浮动各10度，适于崎岖现场施工。

免维护四轮一带，无需注油。

加装履带护板，防止履带脱轨。

加装双钻杆库和大操作站立平台。

?Lengthened chassis , lower center of gravity and better stability .

?The high - torque walking motor has strong climbing ability and fast walking speed , and is equipped with a two - speed walking system to save shifting time .

?Equipped with a walking balance system , the crawler frame floats 10° forward and backward , which is suitable for rough site construction .

?Maintenance - free four - wheel belt , no need to fil

??Oil . Instal track guards to prevent track derailment . A double dril rod carousel and a large operating standing platform are installed .

06、滑架系统 Feeding system

型滑架，双外翻式加工导轨，导轨厚、精度高，推进、提升及滑架补偿更稳定。

一体式钻臂支座，强度高，钻臂稳定性好，维修便捷。多角度、加长型功能钻臂，钻孔范围更广，比同类钻机钻孔工作扇形面积多20%。

滑架及钻臂稳定性好，能压得住，适合光伏大孔作业

?

?Reinforced feed , with double valgus processing wear - resistant guide rail , which is thick and with high precision , can bring more stable performance of feeding , lifting and extension .

?The integrated boom support has high strength , good boom stability and convenient maintenance .

?Multi - angle , lengthened functional dril arm have wider drilling range ,20% more fan - shaped area than similar drilling rigs .

?

07、电控系统 Electronic control system

电控系统采用进口元，品质可靠，故障率低。

发动机的工作运行参数、提示、报警功能集中在仪表上，便于操作者观察，各项数据一目了然。

可选配角度仪，钻机的开孔角度实时显示，方便操作者准确布孔，掌控全局。

?The electronic control system adopts imported compo -nents , with reliable quality and low failure rate .

?The operating parameters , prompts and alarm functions of the engine are concentrated on the instrument , which is conve - nient for the operator to observe and makes the data clear at a glance .

?Inclinometer is optional . The driling angle of the driling rig is displayed in real time , which is convenient for the operator to arrange holes accurately and control the overall situation .