10%银焊条上海斯米克HL301银焊条代理现货
10%银焊条上海斯米克HL301银焊条代理现货
产品价格:(人民币)
  • 规格:HL301
  • 发货地:南京
  • 品牌:
  • 最小起订量:1千克
  • 诚信商家
    会员级别:标准会员
    认证类型:企业认证
    企业证件:通过认证

    商铺名称:南京晶腾焊接材料有限公司

    联系人:李华(先生)

    联系手机:

    固定电话:

    企业邮箱:690901201@qq.com

    联系地址:南京市江宁区秣陵街道诚信大道699号

    邮编:

    联系我时,请说是在焊材网上看到的,谢谢!

    商品详情

      上海斯米克HL301银焊条10%银焊条
      HL301说明:飞机牌HL301是含银10%的银基钎料,价格较低,但熔点高、漫流性差,钎焊接头塑性也较差,因此应用不广。
       HL301用途:主要用于钎焊铜及铜合金、钢及硬质合金。
       HL301钎料化学成分(质量分数)                                %

      Ag

      Cu

      Zn

      9.0~11.0

      52.0~54.0

      36.0~38.0

       HL301钎料熔化温度                                            (℃)

      固相线

      液相线

      815

      850

       HL301钎料力学性能(值例供参考)

      钎料强度/ MPa

      母材

      Rm/MPa

      τm/MPa

      451

      纯(紫)铜

      166

      157

      H62黄铜

      313

      166

      碳钢

      386

      198

       HL301直条钎料直径(长度为500)(mm:0.81.01.21.62.02.53.04.05.0.6.0
       HL301注意事项:
      1、钎焊前必须严格清除钎焊处及钎料表面的油脂、氧化物等污物;
      2、钎焊时须配银钎焊熔剂共同使用。

      斯米克钎焊料分别有:(铜锌钎焊料),(铜磷银基钎焊料),(铝基钎焊料),(锡铅钎焊料),(镍基钎焊料).简介如下:

       

      Category
      类别

      Trade-mark
      牌号

      Specification
      规格

      Melting
      Point
      熔点()

      Chemical
      composition
      主要成份(%)

      Application
      用途

       

      Equivalent
      to AWS
      相当AWS

       

      Copper
      zinc

      铜锌

      L103

      Wire & rod

      885-888

      Cu54 Zn Rem.

      Brazing of copper, bronze and steel, subjected to low load.
      钎焊铜、青铜和钢等受力不大工件

       

      L104

      Foil

      890-930

      Cu57 Mn2
      Co2 Zn Rem.

      Brazing of carbide cutting tool.
      钎焊硬质合金刀具

       

       

      Copper
      phosphorus

       

       

      铜磷

      L201

      Cast rod, wire & rod, powder
      铸条、丝、粉

      710-800

      P7 Cu Rem.

      Brazing of copper and copper alloys.
      钎焊铜及铜合金

      BCuP-2

      L204

      Cast rod, wire
      铸条、丝

      640-815

      P5 Ag15
      Cu Rem.

      Brazing of copper, copper alloys, silver and molybdenum etc.
      钎焊铜及铜合金、银、钼等金属。

      BCuP-5

      L205

      Cast rod, wire & rod, powder
      铸条、丝、箔

      640-800

      P6 Ag5
      Cu Rem.

      Brazing of copper and copper alloys.
      钎焊铜及铜合金

      BCuP-3

      L207

      Cast rod, wire & rod
      铸条、丝

      640-770

      P7 Ag5
      Cu Rem.

      Brazing of copper and copper alloys.
      钎焊铜及铜合金

      BCuP-7

      L209

      Cast rod, wire
      铸条、丝

      684-710

      P7 Ag2
      Cu Rem.

      Brazing of copper and copper alloys.
      钎焊铜及铜合金。

      BCuP-6

       

      Silver
      base

       

      银基

      L302

      Wire & rod

      745-775

      Ag25 Cu40
      Zn Rem.

      Brazing of copper, copper alloys, steel and stainless steel etc.
      钎焊铜及铜合金、钢及不锈钢等

       

      L303

      Wire & rod

      660-725

      Ag45 Cu30
      Zn

      Brazing of copper, copper alloys, steel and stainless steel etc.
      钎焊铜及铜合金、钢及不锈钢等

      BAg-5

      L303F

      Flux coated rod
      涂药丝

      660-725

      Ag45 Cu30
      Zn Rem.

      L303 coated with flux, the same application as L303.
      外涂钎剂的L303,用途与L303相同

      BAg-5

      L304

      Foil

      690-775

      Ag50 Cu34
      Zn Rem.

      Brazing of copper, copper alloys and steel etc.
      钎焊铜及铜合金、钢等

      BAg-6

      L308

      Wire & rod

      779-780

      Ag72 Cu Rem.

      Brazing of copper and nickel under vacuum or reducing protective atmosphere.
      铜和镍的真空或还原保护气氛钎焊

      BAg-8

      L312

      Wire & rod

      595-605

      Ag40.Cu.Zn.Cd

      Brazing of copper, copper alloys, steel and stainless steel etc.
      钎焊铜及铜合金、钢及不锈钢等

       

      L313

      Wire & rod

      625-635

      Ag50.Cu.Zn.Cd

      Brazing of copper, copper alloys, steel and stainless steel etc.
      钎焊铜及铜合金、钢及不锈钢等

      BAg-1a

      L321

      Wire & rod

      615-650

      Ag56.Cu.Zn.Sn

      Brazing of copper, copper alloys, steel and stainless steel etc.
      钎焊铜及铜合金、钢及不锈钢等

      BAg-7

      L323

      Wire & rod

      665-755

      Ag30.Cu.Zn.Sn

      Brazing of copper, copper alloys, steel and stainless steel etc.
      钎焊铜及铜合金、钢及不锈钢等

       

      L325

      Wire & rod

      645-685

      Ag45.Cu.Zn.Sn

      Brazing of copper, copper alloys, steel and stainless steel etc.
      钎焊铜及铜合金、钢及不锈钢等

      BAg-36

      L326

      Wire & rod

      650-720

      Ag38.Cu.Zn.Sn

      Brazing of copper, copper alloys, steel and stainless steel etc.
      钎焊铜及铜合金、钢及不锈钢等

      BAg-34

       

      Aluminum base

      铝基

      L400

      Cast rod, wire & rod
      铸条、丝

      577-582

      Si11.5
      Al Rem.

      Brazing of aluminum and aluminum alloys.
      铝及铝合金的钎焊

      BAlSi-4

      L401

      Cast rod
      铸条

      525-535

      Si5 Cu28
      Al Rem.

      Brazing of aluminum and aluminum alloys.
      铝及铝合金的钎焊

       

       

      Tin lead

      锡铅

      L600

      Wire & rod

      183-185

      Sn60 Sb≤0.8
      Pb Rem.

      Soldering of fusible metals and heat-treated part.
      易熔金属及热处理件的钎焊

      60Sn

      L601

      Wire & rod

      183-227

      Sn18 Sb2
      Pb Rem.

      Soldering of copper, copper alloys and galvanized iron plain sheet.
      铜及铜合金、镀锌铁皮的钎焊。

      18Sn

      L602

      Wire & rod

      183-256

      Sn30 Sb2
      Pb Rem.

      Soldering of copper, brass, copper alloys and galvanized iron plain sheet.
      铜、黄铜、铁、镀锌铁皮的钎焊

      30Sn

      L603

      Wire & rod

      183-235

      Sn40 Sb2
      Pb Rem.

      Soldering of copper, copper alloys, steel and zinc parts.
      铜及铜合金、钢、锌制零件的钎焊

      40Sn

      L604

      Wire & rod

      183-222

      Sn90 Sb≤0.15
      Pb Rem.

      Soldering of copper and steel for food and medicine field.
      食品、医疗所需铜、钢等金属的钎焊

      90Sn

      L605

      Wire & rod

      232-240

      Ag5 Sn95

      Soldering of copper and steel for electrical and food field.
      电器、食品所需铜、钢等金属的钎焊

       

      L608

      Wire & rod

      295-305

      Sn5.5 Ag2.5
      Pb Rem.

      Soldering of copper, copper alloys, steel and stainless steel.
      铜及铜合金、钢及不锈钢的钎焊

       

      Nickel base

      镍基

      L702

      Powder

      970-1000

      Cr7 B3 Si4
      Ni Rem.

      Brazing of stainless steel under vacuum or protective atmosphere.
      不锈钢真空或保护气氛钎焊

      BNi-2

       

      Category
      类别

      Trade-mark
      牌号

      Product name
      名称

      Characteristics & application
      特性和用途

      Gas
      welding

      气焊

      CJ301

      Copper gas welding flux
      铜气焊熔剂

      Melting point is about 650, flux for gas welding and brazing of copper and copper alloys.
      熔点约650,铜及铜合金气焊或钎焊的助熔剂

      CJ401

      Aluminum gas welding flux
      铝气焊熔剂

      Melting point is about 560, flux for gas welding of aluminum and aluminum alloys.
      熔点约560,铝及铝合金气焊的助熔剂

       

      Silver
      brazing

      银钎焊

      QJ101

      Silver brazing flux
      银钎焊熔剂

      Brazing flux of copper, copper alloys, steel and stainless steel within 550-750.
      550-750范围钎焊铜及铜合金、钢及不锈钢的助熔剂

      QJ102

      Silver brazing flux
      银钎焊熔剂

      Brazing flux of copper, copper alloys, steel and stainless steel within 600-850.
      600-850范围钎焊铜及铜合金、钢及不锈钢的助熔剂

      QJ102A

      Silver brazing flux
      银钎焊熔剂

      Brazing flux of copper, copper alloys, steel and stainless steel within 600-850. Non agglomeration.
      600-850范围钎焊铜及铜合金、钢及不锈钢。不易结块

      QJ112

      Silver brazing paste flux

      膏状银钎焊熔剂

      Brazing flux of copper, copper alloys, steel and stainless steel within 600-850.
      600-850范围钎焊铜及铜合金、钢及不锈钢的助熔剂

      QJ103

      Silver brazing flux
      银钎焊熔剂

      Brazing flux of copper, copper alloys, steel and stainless steel within 550-750.
      550-750范围钎焊铜及铜合金、钢及不锈钢的助熔剂

      Aluminum brazing

      铝钎焊

      QJ201

      Aluminum brazing flux
      铝钎焊熔剂

      Brazing flux of aluminum and aluminum alloys within 450-620.
      450-620范围钎焊铝及铝合金的助熔剂

      QJ207

      Aluminum brazing flux
      铝钎焊熔剂

      Brazing flux of aluminum and aluminum alloys within 560-620.
      560-620范围钎焊铝及铝合金的助熔剂


      Category
      类别

      Trade-
      mark
      牌号

      Chemical
      composition
      化学成份(%)

      Hardness
      硬度

      Application
      用途

       

      Oxy-
      Acetylene
      Flame
      spray-
      using

       

       

       

       

       

      F103

      Cr10 B1.5 Si3 Ni Rem.

      HRc 25

      Spray-fusing of cast iron parts,,, such as die for glass, cylinder, and guide.
      铸铁件的喷焊,如玻璃模具,汽缸、导轨

      F101

      Cr10 B2.5 Si3 Ni Rem.

      HRc 45

      Spray-fusing of parts resistance to wear and corrosion, such as valve, the rotator and piston of pump.
      耐磨、耐蚀件的喷焊,如阀门、泵转子、泵柱塞

      F101Fe

      Cr10 B2.5 Si3 Fe10

      Ni Rem.

      HRc 45

      Spray-fusing of corrosion-resistant parts, such as axle and stigma.
      耐磨件的喷焊,如轴类、汽门

      F102

      Cr16 B4 Si4 Ni Rem.

      HRc 60

      Spray-fusing of parts resistance to wear, corrosion and high temperature oxidation, such as die and piston.
      耐磨、耐蚀、抗高温氧化工件的喷焊,如模具、柱塞

      F102Fe

      Cr16 B4 Si4 Fe15

      Ni Rem.

      HRc 60

      Spray-fusing of corrosion-resistant parts, such as axle and cold die.
      耐磨件的喷焊,如轴类、冷模具

      F105

      F102+50%WC

      HRc 60

      Spray-fusing of parts resistance to grain-wear , such as guide plate, scraper and blade of fan.
      抗磨粒磨损场合的喷焊,如导板、刮板、风机叶片

      F105Fe

      F102Fe+35%WC

      HRc 60

      Spray-fusing of parts resistance to grain-wear, such as guide plate, scraper and blade of fan.
      抗磨粒磨损场合的喷焊,如导板、刮板、风机叶片

      F108

      F102+80%WC

      HRc 60

      Spray-fusing of parts resistance to strong grain-wear and free machining, such as harrow teeth of dredger.
      抗强烈磨粒磨损,无需加工场合的喷焊,如挖泥船耙齿

      F301

      Cr5 B4 Si4 Ni30

      Fe Rem.

      HRc 45

      Spray-fusing of vulnerable parts of agricultural machinery and mining machinery, such as gear and axletree.
      农机,矿山机械易损件的喷焊,如齿轮,车轴

      Track iron powder

      轨铁粉

      Cr5 B1.5 Si3 Ni30

      Fe Rem.

      HRc 28

      Repair spray-fusing of defects such as scratch and concavity of railroad track.
      铁路钢轨擦伤、低塌等缺陷的修复喷焊

       

      Oxy-acetylene flame spraying

       

      F111

      Cr5 B1.5 Si3 Ni30

      Fe Rem.

      HB 150

      Spraying of bearing and cutting parts etc.
      轴承、切削件等的喷涂

      F113

      Cr10 B1.5 Si3 Ni Rem.

      HB 250

      Spray-fusing or spraying, such as roll, piston and axle of wear and corrosion resistance.
      喷涂亦可喷焊,如滚筒、柱塞、耐蚀耐磨轴等

      F313

      Cr15 B1.5 Fe Rem.

      HB 250

      Spraying of dryer of papermaking and axle.
      造纸烘缸、轴类的喷涂

      F314

      Cr18 Ni9 B1.5 Fe Rem.

      HB 250

      Spraying of axle.
      轴类喷涂

      F412

      Sn10 P0.3 Cu Rem.

      HB 80

      Spraying of axle and bearing.
      轴、轴承的喷涂

      F512

      复合Al5Ni95

       

      Backing spray of transition layer between base and working layer.
      喷涂层的基体与工作层之间过渡(打底)层用喷涂

       

      PTA

      hardfacing

      F221

      Cr26 W5 B0.7 Co Rem.

      HRc 43

      PTA hardfacing of sealing surface of high temperature and high pressure valve and the edge of hot shearing tool.
      高温高压阀门密封面、热剪切刃口的等离子喷焊

      F223

      Cr21 W5 B1.5 Co Rem.

      HRc 40

      PTA hardfacing of parts resistance to wear and corrosion at high temperature, such as valve under high temperature and high pressure, and blower.
      高温下耐磨耐蚀件的喷焊,如高温高压阀门、鼓风机

      F321

      Cr13 B1.5 Si1 Fe Rem.

      HRc 45

      PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as stop-plate etc.
      中温中压阀门的闸板及其他耐磨件的等离子喷焊

      F322

      Cr23 Ni13 Si5 B1

      Fe Rem.

      HRc 40

      PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as valve base etc.
      中温中压阀门的阀座及其他耐磨件的等离子喷焊

      F422

      Sn10 P0.3 Cu Rem.

      HB 80

      PTA hardfacing of axle and bearing etc.
      轴、轴承等离子喷焊

       


    在线询盘/留言
  • 0571-87774297