12H热锻模焊条

特 性	高度耐热耐磨耗,540℃高温依然可保持52~54HRC. High abrasion resistance, heat 1,000-degree still can keep 54HRC - 52.
用 途	用于耐热耐磨耗硬度要求很高的锻模或锤锻模刃口修复.更适用于H13等热作模具局部和型腔修复. For high hardness resistant abrasion resistance of blade forging hammer forging or repair H13 etc. More suitable for ReZuo mold cavity and local repair.
规 格	2.6￠ 3.2￠ 4.0￠

UTP 673工模具焊条

特 性	Cr Mo W V多元合金钢耐磨堆焊材料,通过热处理可调整堆焊金属的硬度,耐热到550℃. Cr Mo w. v. multivariate alloy wear-resistant overlaying welding materials, heat treatment can be adjusted by the hardness and resistance buttering metal 550 degrees Celsius.
用 途	用于堆焊冷作热作工具,模具.如压铸模具,锻造工具 热修整工具和冷切刀,可堆焊在低合金钢上制成工具. Used for surfacing cold ReZuo tool, die casting die forging. Such as heat, cold and tool grinding tools, cutting knife can be made in the low alloy steel # tools.
规 格	2.6￠ 3.2￠ 4.0￠

CARBO 6W各种刃口堆焊使用

特 性	高铬成份,耐磨耗耐龟裂性能优良,焊后硬度较高,机械加工困难. High chrome component, abrasion resistance, resistance to crack excellent performance after welding, machining difficulty high hardness.
用 途	淬火硬化模具钢刃口的修补,适用于SKD11合金工具钢,淬火后的模具钢修补. Quench hardened steel blade of repair, applicable to SKD11 alloy steel, alloy after quenching repair.
规 格	2.6￠ 3.2￠ 4.0￠

TM-2000模具硬化堆焊用

特 性	对冲压模的金属磨耗非常有效,焊金第一次为奥氏体组织,第二层为高硬度的马氏体组织.火焰淬火钢也可以直接堆焊. The metal stamping mould for abrasion is very effective for the first time, welding gold austenitic organization, the second is the high hardness martensite steel quenching. Flame may also directly hardfacing.
用 途	直接堆焊各种铸铁材的模具. All sorts of cast iron material directly surfacing of mould.
规 格	2.6￠ 3.2￠ 4.0￠ 5.0￠

GNK-8C打底焊条

特 性	高铬成份,焊金具有高拉力,高韧性 HB-280. High chrome component, high strength, welding gold high toughness HB - 280.
用 途	铸钢模硬面制做打底缓冲层,裂缝敏感度较高的特种钢接合衬焊使用. Cast steel hardfaced making render buffer layer, crack sensitive use of special steel lining welding joints.
规 格	2.6￠ 3.2￠