商铺名称：南宫市银辉焊接材料制造厂
联系人：董亮（先生）
联系手机：
固定电话：
企业邮箱：413171525@qq.com
联系地址：南宫工业区85号
邮编：55750
联系我时，请说是在焊材网上看到的，谢谢！
|
ERNiCrFe-7 was designed to meet the critical requirements within the nuclear power |
||||||
| industry.This nickel-chromium-iron welding wire provides corrosion-resistant welds on a | ||||||
| broad range of low alloy and stainless steels and is utilized in applications requiring |
| resistance to oxidizing acids. | ||||||
| CLASSIFICATIONS: | ||||||
| ERNiCrFe-7 | ||||||
| AWS A5.14 | ||||||
| ASME SFA 5.14 | ||||||
| UNS N06052 | ||||||
| APPLICATIONS: | ||||||
| ERNiCrFe-7 delivers the higher chromium level needed for stress-corrosion cracking | ||||||
| resistance in the vital pure water environments of nuclear power plants.This wire welds | ||||||
| NicrFe alloys ASTM B163, B166, B167and B168, to itself and to dissimilar joint configurations. | ||||||
| DIAMETERS: | ||||||
| 0.035'', 0.045'', 0.63'', | ||||||
| 3/32'',1/8'', | ||||||
| 5/32'',3/16'' | ||||||
| TYPICAL | ||||||
| MECHANICAL PROPERTIES: | ||||||
| Tensile Strength (psi) 80,000 | ||||||
| Percent Elongation 30 | ||||||
| TYPICAL | ||||||
| CHEMICAL COMPOSITION: | ||||||
| C | Mn | P | S | Si | Ni | |
| 0.03 | 0.40 | 0.001 | 0.001 | 0.23 | 58.50 | |
| Cr | Fe | Ti | Cb+Ta | |||
| 29.90 | 9.60 | 0.72 | 0.47 | |||
|
The primary use of ERNiCrFe-6 is for clading steel with nickel-chromium-iron weld metal and |
||||||
| for joining stell and stainless stell to nickel-base alloys.Weld deposits can be age- hardened | ||||||
| with the degree of hardness depending on the time and temperature. | ||||||
| CLASSIFICATIONS: | ||||||
| ERNiCrFe-6 | ||||||
| AWS A5.14 | ||||||
| ASME SFA 5.14 | ||||||
| UNS N07092 | ||||||
| APPROVALS: | ||||||
| MIL-E-21562E | ||||||
| MIL-EN/RN6A | ||||||
| APPLICATIONS: | ||||||
| ERNiCrFe-6 is well suited for applications requiring superior corrosion resistance from | ||||||
| cryogenic to elevated temperatuers (up to 1800°F). Typical examples include power genera- | ||||||
| tion and petrochemical plants and fur- nace equipment. | ||||||
| DIAMETERS: | ||||||
| 0.035'', 0.045'', 0.063'', | ||||||
| 3/32'', 1/8'', 5/32'', | ||||||
| 3/16'' | ||||||
| TYPICAL | ||||||
| MECHANICAL PROPERTIES: | ||||||
| TENSILE STRENGTH(PSI) 80,000 | ||||||
| PERCENT ELONGATION 30 | ||||||
| TYPICAL | ||||||
| CHEMICAL COMPOSITION: | ||||||
| C | Mn | P | S | Si | Ni | |
| 0.05 | 2.40 | 0.001 | 0.001 | 0.17 | 70.40 | |
| Cr | Fe | Ti | ||||
