HB-YD114(Q)
 1.6
 50-55

(受强烈冲击后

After high impact)
 高锰钢堆焊焊丝，受强烈冲击后，表面具有加工硬度的特点。

High-manganese steel hardfacing flux-cored wires, and applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening.
 
HB-YD115(Q)
 1.6
 50-55

(受强烈冲击后After high impact )
 用于受严重冲击高锰钢堆焊，加工硬化效果显著。

Applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening.
 
HB-YD165(Q)
 1.6
 60-65
 高硬度耐磨焊丝，适用于磨粒磨损表面堆焊

High hardness wear-resistant wire, it is used to abrasive wear surfacing welding.
 
HB-YD172(Q)
 1.6
 ≥40
 用于堆焊齿轮、挖泥斗、矿山机械等磨损件

Applied to repair surface of high impact wear parts, such as gear aud bucket and mining machinery.
 
HB-YD207(Q)
 1.6
 ≥50
 用于堆焊推土机刀片，螺旋桨等磨损零件

Applied to repair surface of high wear parts, such as bulldozer blade and propeller.
 
HB-YD212(Q)
 1.2/1.6
 ≥50
 用于堆焊各种受磨损的机件表面，如齿轮、挖斗、矿山机械

Applied to repair surface of wear parts, such as gear mud bucket and mining machinery.
 
HB-YD256(Q)
 1.6
 HB≥170
 高锰钢堆焊，适用于破碎机等受冲击磨损部位的堆焊

High-manganese steel hardfacing flux-cored Wires, it is applied to repair surface of high impact wear parts, such as Crusher.
 
HB-YD258(Q)
 1.6
 55-60
 用于耐磨表面堆焊

Applied to repair surface of wear parts.
 
HB-YD265(Q)
 1.6
 60-65
 高硬度耐磨焊丝，适用于磨粒磨损表面堆焊

High hardness wear-resistant wire, it is used to abrasive wear surfacing welding.
 
HB-YD322(Q)
 1.6
 ≥55
 用于堆焊各种冲模及切削刃具，兼用于修复要求耐磨损性能较高之机械零件

Applied to repair surface of high wear resistance parts, such as die and cutting cutlery.
 
HB-YD327A(Q)
 1.6
 ≥55
 专门用于模具堆焊，耐磨性能高于D322

Used to mould surfacing, wear resistance is better than D322.
 
HB-YD337(Q)
 1.6
 ≥48
 用于铸钢或锻钢上堆焊锻模

Applied to repair forging die at cast steel or forging steel.
 
HB-YD397(Q)
 1.6
 ≥40
 用于堆焊铸钢或锻钢做坯体的热锻模或堆焊高强度耐磨件

/sell/2012.html /

Applied to repair hot forging die at cast steel or forging steel, or high strength wear surfacing.
 
HB-YD405A(Q)
 1.6
 50-59
 用于热轧辊开坯辊堆焊

Applied to repair hot-rolling blooming rollor.
 
HB-YD430A(Q)
 1.6
 20-35
 打底层堆焊焊丝

A backing hardfacing flux-cored Wires
 
HB-YD488A(Q)
 1.6
 45-50
 用于轧辊堆焊

Applied to repair rollor
 
HB-YD507Mo(Q)
 1.6
 35-45
 用于510℃以下中高压阀门堆焊

Applied to valve which operating temperature is less than 510℃.
 
HB-YD518(Q)
 1.6
 40-50
 用于连铸辊堆焊

Applied to repair continuous caster roller
 
HB-YD688(Q)
 1.6
 50-60
 用于磨煤辊打底焊(韧性好，可以多层堆焊)

Used to coal roller backing welding.
 
HB-YD788(Q)
 1.6
 55-62
 硬度高，可以多层堆焊。

High hardness and multi-layer welding
 
HB-YD888(Q)
 1.2, 1.6
 60-65
 硬度高，堆焊层厚度不超过6mm。

High hardness, but the thickness of surfacing layer is less than 6mm.
 
HB-YD888Ni(Q)
 1.2
 58-65
 高铬合金焊丝，用于耐磨表面堆焊

Applied to repair surface of wear parts.
 
HB-YD988(Q)
 1.6
 55-63
 高铬合金焊丝，用于耐磨表面堆焊

Applied to repair surface of wear parts.
 
HB-YD990(Q)
 1.6
 55-65
 用于高温耐磨堆焊。

Applied to repair surface of high temperature wear parts. 
 
HB-YD58(Q)
 1.6
 55-60
 高温耐磨焊丝，用于化推焦机磨靴的堆焊。

high temperature wear hardfacing wires,
 
HB-YD67(Q)
 1.6
 58-63
 用于耐磨表面堆焊

Applied to repair surface of wear parts.
 
HB-YD95(Q)
 1.6
 55-63
 高铬合金焊丝，用于耐磨表面堆焊

Applied to repair surface of wear parts.
 
HB-DG7(Q)
 1.6
 52-60
 地铁盾构施工刀具刃口堆焊专用，也可用于煤碳石装载机料斗和刃口堆焊修复。