Delivering a smooth even beam, the PLCYC2 seamlessly blends intense washes of colour on your cyclorama. Using LED source technology combined with a properly shaped asymmetrical reflector, the PLCYC2 delivers consistent and powerful light distribution without the compromising performance of vertical or horizontal spreader lenses.
Proven LED Engine
The PLCYC2 uses the same proven LED engines as the Philips Selecon PL1, PL3, PLFRESNEL1, PLPROFILE1 and the PLCYC1 meaning colour matching is simplified across the stage. The user interface is the same ensuring ease of use.
The Obvious Choice for Large Cycloramas
A key benefit of the PLCYC2 is that it is no longer necessary to change lamps or mix the colour on the cyclorama using multiple fixtures. One source allows multiple colours. Fading between colours is seamless and allows designers a new level of creativity. Fewer luminaires to cover the cyclorama, less power and no dimmer circuits makes the PLCYC2 the obvious choice for lighting a large sized cyclorama.
Consistent light distribution without the use of vertical or horizontal spreader lenses.
Homogenised, Fully Mixed Light
No multiple colour shadows.
Twin single source RGBW LED chips deliver limitless colour mixing and colour temperature.
Electrical and Mechanical Specifications
| Source | 2 each, true RGBW 120W LED chip |
| Output | > 2000 Lumens (white light) |
| Operating Voltage | 100V–240V AC (auto-ranging) |
| Frequency | 50/60Hz |
| Current Draw |
2.6A at 115V / 1.3A at 240V
Maximum 20A Thru Current |
| Ambient Temperature | 35°–40°C |
| Control | On-board menu / DMX512 |
| Construction | Aluminium, sheet metal, and molded engineering grade plastic components |
| The LED Engine | The PLCYC2's powerful LED engines offers exceptional performance and life. Under normal operating conditions our LED engine has a life expectancy in excess of 25,000 hours, however under worst case operating conditions with the luminaire set to continuous full output it is possible that a small percentage of LEDs may require replacement sooner. The Philips Selecon three-year limited warranty includes our guarantee against premature failure of the LED engine. |
| Colour | Black |
| Weight | 9kg (luminaire only) |
| Standards Compliance | ETL / cETL Listed and CE Marked |
| Warranty | Three-year Warranty. |
Size Diagrams
|
Performance
- Twin single source RGBW LED chips deliver limitless colour mixing capabilities and colour temperature.
- Single units mean it is no longer necessary to change lamps or mix the colour on the cyclorama using multiple fixtures. One source allows multiple colours.
- Fading between colours is seamless and allows designers a new level of creativity.
- Homogenised fully mixed light, no multiple colour shadows.
- Asymmetric reflector directs more light downward to produce visually even illumination down a vertical surface.
- Quick selection of colour pre-sets.
- Can be used as a top cyclorama or a groundrow simply by rotating the yoke.
Precision
- PowerCon in and through to light your cyclorama from one 10A non-dim circuit.
- Typical power consumption varies between 26W and 83W.
- DMX512 Input/Output with 8 or 16-bit resolution.
- Wireless DMX module available.
Simplicity
- No need for dimmers, connect directly to mains supply.
- No need for lamp replacement or filter maintenance.
- Onboard LCD Menu for ease of addressing/setup.
- Fitted with rated safety cable.
- Philips Selecon 3-year warranty.
