MS8604A价格，MS8604A价格
MS8604A价格，MS8604A价格
产品价格：￥1（人民币）
  • 规格：MS8604A
  • 发货地：深圳
  • 品牌：
  • 最小起订量：1台
    • QQ洽谈 点击询价 进入商铺
    深圳市迈凯瑞仪器仪表有限公司
    免费会员
    会员级别：试用会员
    认证类型：未认证
    企业证件：未通过
    认证信息：未认证

    商铺名称：深圳市迈凯瑞仪器仪表有限公司

    联系人：姚红娟（小姐）

    联系手机：

    固定电话：

    企业邮箱：1946418560@qq.com

    联系地址：深圳市宝安区民治留仙大道2号天辅星大厦501

    邮编：518000

    联系我时，请说是在焊材网上看到的，谢谢！

    商品详情

      MS8604A|Anritsu|日本安立|8G|射频频谱仪|100Hz至8.5GHz

      品牌： Anritsu | 日本安立

      特点
              联系人：姚小姐：电话13510169620    QQ:1946418560    廖先生13590256385  QQ：785298834

      ·100Hz~8.5GHz
      ·由单一系统评估主发射机功能
      ·与NADC,PDC,PHS,数字MCA, GSM, DCS1800(PCN), CT2, DECT,WCPE,PACS,RCR STD-39 TETRA系统及GMSK和π/4 DQPSK通用测量软件相兼容;
      ·高速测量(调制精度测量小于1s)
      ·输入共10W(内部有用于高功率测量的20dB衰减器及功率计

      技术指标
       

      General Frequency
      range      		 100Hz to 8.5GHz
      Maz.input
      level
      (continuous
      wave
      average
      power)      		 +40dBm(10W)
      Reference oscillator Frequency:10MHz
      Starting characteristics:≤5×0.00000001/day(option:≤2×0.00000001/day after30 min.warm-up)
      *After 10min.of warm-up,compared to the frequency after 24-hour warm-up
      Aging rate:≤2×0.00000001/day(option:≤5×0.000000001/year)
      *Compared to the frequency after 24-hour warm-up
      Temperature characteristics:5×0.00000001/day(option:3×0.00000001/day)
      *0to 50℃,relative to the frequency at 25℃
      Spectrum
      anallyzer      		 Frequency
      Setting range:100Hz to 8.5GHz(resolution:1Hz),0to 2GHz(freq.band:0),1.7to7.5GHz(freq.band:1-),6.5to 8.5GHz(freq.band:1+)
      Preselector range:1.7to 8.5GHz (bands:1-/1+)
      Display accuracy:±(display freq.×reference freq.accuracy+span×span accuracy)
      Span
      Setting range:0Hz,100Hz to 8.5GHz
      Accuracy: ±2.5%(span≥1kHz),±5%(100Hz≤span<1kHz)
      RBW
      Setting range:10Hz to 3MHz(3dB),1-3serqence
      Accuracy:±20%
      Selectivity(60/3dB);≤15:1(100kHz to 3MHz),≤12:1(10Hz to 30kHz)
      VBW:1Hz to 3MHz,off,1-3 seqrence
      Signal purity(SSB,1MHz to 4GHz):
      ≤-100dBc/Hz(10kHz offset,≤-115dBc/Hz(50kHz offset),≤-120dBc/Hz(100kHzoffset)
      Spec-
      trum analyzer      		 Ampl-
      itude      		 Level Level measuring range:Average:Average noiselevl to +40dBm
      Average noise level:≤-112dBm(10MHz to 8.5Ghz,RBW 10Hz,VBW 1Hz,input att.setting20dB)
      Residual reponse:≤-75dBm(1MHz to 8.5GHz,input att.setting 20dB)
      Reference
      level      		 Setting range:-80to +40dBm
      Accuracy:±0.5dB(-30to +20dBm),±0.75dB(-40to -30dBm,+20to +40dBm),±1.5dB(-60to-40dBm)
      *After calibration and at freq.100Mhz,span≤2MHz,and in auto mode for inputatt ,RBW,VBW and sweep time settings
      RBW switching error(after calibration):±0.3dB(RBW:≤300kHz),
      Frequency reponse ±0.5dB(100MHz to 2GHz,band:0),±1dB(1.7to8.5GHz,bands:1-/1+)
      Linearity(
      after calibration)      		 LOG:±0.3dB(0to -20dB,RBW:≤100kHz),±1.5dB(0to-80dB,RBW≤10kHz)
      LIN:±5%(to reference level)
      Dynamic
      range      		 2nd harmonics:
      ≤-70dBc(5to 800MHz,band:0,mixer input level:-30dBm)
      ≤-80dBc(800to 850MHz,band:0,mixer input level:-30dBm),
      ≤-90dBc(850MHz to 2.1GHz,bands:1-,mixer input level:-10dBm)
      Two-signal third-ouder intermodulation distortion:≤-70dBc(10to 50MHz),≤-85dBc(50MHzto 2.1GHz)
      *Frequency difference between two signals≥50kHz,mixer input level:-30dBm
      Sweep Sweep time
      Setting range:20ms to 1000s(TRACE-FREQ,data points:NORMAL),50ms to 1000s at other conditions
      Accuracy:±10%(20ms to 200s),±15%(200 to 1000s)
      Sweep mode:CONTINUOUS,SINGLE
      Trigger:FREE RUN,TRIGGERED
      Trigger source:VIDEO,LINE,EXT(±10V),EXT(TTL)
      Gate mode(OFF,random sweep mode)
      GATE DELAY:0to 65.5ms(in 1μs steps,GATE END:INT)
      GATE END:INT/EXT
      Time
      domain
      waveform
      display      		 Sweep fime:50,100to 900μs(data point:NORMAL,Onemost significant digit can be set.)
      1ms to 1000s(data point:NORMAL,Two most significant digits can be set)
      100,200to800μs(data point:DOUBLE,One most significant digit can be set aseven number.)
      1ms to 1000s(data point:DOUBLE,Two most significant digits can be set aseven number.)
      Delay time
      Pre-trigger.-time span to 0s(in 1point steps)
      Post trgger:0to 65.5ms(in 1μssteps)
      Amplitude display resolution:50μsto 49ms,10bits*0.1%of full scale)
      50ms to 1000s,14bits(0.01%of full scale)
      Detection
      mode      		 POS PEAK,SAMPLE,NEG PEAK
      Number
      of
      points      		 NOUMAL:501 points,DOUBLE:1002points
      AM/FM
      demodu-
      lation      		 Demodulated waveform display and monitoringdemodulated audio signal with internal speaker
          Auxiliary inputs/
      outputs      		 IF output21.4MHz:-10dBm±2dB(at top of
      screen,with output terminated by 50Ωteminator),BNC connector? /> Youtput:0to 0.5V±0.1V(at range between
      top and bottom of screen,LOG:10dB/div,LIN:10%/div,100MHz
      and with output terminated by 75Ω
      terminator),BNC connector
      External trgger input
      Input1:max.±10V(in 0.1V steps,
      rising/falling edges selectable
      and pulse width≥10μs),BNC connector
      Input2:TTL level(rising/falling
      edges selectable and pulse width≥10μs,
      )BNC connector
      Power meter Frequency range 100kHz to 5.5GHz
      Level range -20to +20dBm
      Instrumentation
      accuracy      		 ±0.5%
      Zero set ±0.5% of full scale at most
      sensitive range(100μW range)
      Zero shift between
      ranges      		 ±0.2% of full scale zero setting at mostsensitive range
      Calibration oscillator Freq:50MHz,Output:1.00mW,Accuracy:±1.2%
      Applicable power
      sensor      		 MA4601A
      Others Display 640×400dot,9-inch EL
      Inputs/outputs on rear panel Reference input:10MHz±10Hz,2to 5Vp-p,
      ≥50Ω,BNC connector
      Reference buffer output:10MHz,2to
      3Vp-p(with the output terminated by
      200Ω terminator),BNC connector
      Separate video output:Compatible
      with 8-pin DIN connector
      External memory One slot for can be connected
      Save/recall Internal memory(4sets of spectrum
      and Tx test conditions),can
      save/recall setting conditions
      at extemal memory(PMC)
      Direct plotting Can hard-copy screen via GPIB2
      External control GPIB1
      (IEEE488.2)      		 As device controlled by host,all
      functions except power swetch
      Controls other instruments as controller
      using PTA
      SH1,AH1,T6,L4,SR1,RL1,PP0,DC1,DT1,
      C0(C1,C2,C3,and C24with PTA)
      GPIB2
      (IEEE488.1)      		 Controls other instruments as controller
      SH1,AH1,T6,L4,SR1,RL1,PP0,DC1,DT1
      ,C1,C2,C3,C4,C28
      I/O port Output port A/B:8-bit(TTL level),
      Input/Output port C/C:4-bit(TTL level),
      EXclusive port:3-bit(TTL level)
      Control signal:4(TTL level),+5V
      output:Max.50mA
      RS-232C
      (Option 02)      		 Controls other instruments as
      controller
      PTA Language PTL:High level languaeg interpreter
      based on BASIC
      Programming Using external keyboard
      Program
      memory      		 On PMC or FD
      Upload/download from/to PC
      Programming capacity 900KB
      Operating temperature 0°to 50℃
      Power 85to 132/170 to 250Vac,47.5 to 63Hz
      ,≤500VA
      Dimensions and mass 426(W)×221.5(H)×451(D)mm,≤27kg
      EMC*1 EN55011:1991,Group1,ClassA
      EN50082-1:1992
      Safety EN61010-1:1993(Installation CategoryII
      ,Pollution DegreeII)

    在线询盘/留言
    • 产品推荐
    精品推荐
    0571-87774297