Jupiter-BBB高镍铸铁焊条
Shield Metal Arc Welding(SMAW - Stick)
For all cast irons - meehanite, ductile, mealleable, gray cast irons, and steel to cast iron with excellent machinability.
适用于所有铸铁：Meehanite孕育铸铁、球墨铸铁、可锻铸铁、灰口铸铁，以及钢和铸铁的焊接，焊缝可加工性佳。
Features
亮点
Strength Up To 65,000 psi/448MPa
抗拉强度高达65,000 psi/448MPa
Non-Conductive Coating Eliminates Side Arcing
非导电涂层可消除偏弧
All positions
全位置焊接
Use In Tight Spots
可在狭窄部位使用
Good Arc Visibility
良好的电弧可见性
Great Weld Appearance
出色的焊缝外观
Soft Stable Arc
软稳定弧
Weld over Dirt and Oil
可在油污上直接进行焊接
Porosity Free
无气孔
Easiest cast iron rod to use
极易使用
Excellent Machinability 卓越的可加工性
Coating Will Not Overheat Even On AC 涂层即使在交流电下也不会过热
Characteristics
特点
Jupiter-BBB has a special non-conductive coating, which permits welding in tight spaces without side arcing. It produces fully machinable deposits and allows simple repair of defective, broken or worn castings, even in deep holes or out-of-position.
Jupiter-BBB has a soft stable arc and low-fuming characteristics that let the welder see and control the arc puddle.
Since Jupiter-BBB can generally be used without preheat, cast parts can often be repaired in place without disassembly.
Jupiter-BBB配有特殊的非导电涂层，可以在狭小的空间内进行焊接，而不会产生偏弧。它产生完全可加工的熔敷层，可以简单的对有缺陷、断裂或磨损的铸件进行修复，即使是在深孔或尴尬位置的情况下。
Jupiter-BBB具有柔软稳定的电弧和低烟雾特性，让焊工易于看到和控制电弧熔池。
由于Jupiter-BBB通常可以在没有预热的情况下使用，因此铸件通常可以在不拆卸的情况下进行现场修复。
Technical技术规格
Size and Amps AC/DC+(DCEP)
|
Inches |
3/32 |
1/8 |
5/32 |
|
(mm) |
(2.4) |
(3.2) |
(4.0) |
|
Amps |
48-72 |
80-120 |
100-150 |
Best Practices Application 应用
Use medium arc and stringer beads.
使用中等电弧和线状焊道。
Skip weld to prevent overheating.
跳焊以防止过热。
Light peening recommended.
建议轻敲击。
Preheat critical or heavy parts to 500?F(260?C).
将关键或重型零件预热至500?F（260?C） 。
Cool slowly after welding.
焊后缓冷。
