HA34e/315-4 HAX34P/315-4 HAX4/310-4

福州天行健provide原厂GEA-Bock船用压缩机及压缩机零部件

福州天行健节能科技有限公司提供欧美日船舶原装进口品牌零部件

HA single-stage compressors
The HA-system - the best solution for deep-freezing!

Special features:
- Direct intake with external ventilation
- Suction gas intake directly into the compressor
- Motor cooled by an integrated ventilation unit

This reduces the compressed gas temperature and thus expands the range of application while at the same time increasing capacity (deep-freeze, R22, R404A). At the same time, the compressor is physically separated from the compressor, with advantages particularly in the case of motor damage.

HAX34e/315-4

Application Refrigeration & AC

Compressor refrigeration capacity 4.64 kW

Power consumption 3.38 kW

Current draw (400 V) 6.66 A

Mass flow 0.035 kg/s

at following operating condition:

Refrigerant R404A, R507

Reference temperature Dew point

Evaporating temperature -35.0 °C

Condensing temperature 40.0 °C

Supply frequency 50 Hz

Voltage 400 V

Suction gas temperature 20 °C

Subcooling (outside cond.) 0 K

Number of cylinders / Bore / Stroke 4 / 50 mm / 40 mm

Displacement 50/60 Hz (1450/1740 1/min) 27,30 / 32,80 m3/h

Voltage 1) 220-240V Δ / 380-420V Y -3- 50Hz

265-290V Δ / 440-480V Y -3- 60Hz

Max. working current 2) 17.1 / 9.9 A

Max. power consumption 2) 5.8 kW

Starting current (rotor blocked) 2) 111.0 / 64.0 A

Motor protection INT69 G

Protection terminal box / HA-fan IP 66 / IP 44

Voltage HA-fan 230 V - 1 - 50/60 Hz, 38 W

Weight 96 kg

Max. permissible overpressure (g) (LP/HP) 3) 19 / 28 bar

Connection suction line SV 22 mm - 7/8 "

Connection discharge line DV 16 mm - 5/8 "

Lubrication Oil pump

Oil type R134a, R404A, R407A/C/F, R448A, R449A, R450A, R513A BOCKlub E55

Oil type R22 BOCKlub A46

Oil charge 1,3 Ltr.

Dimensions Length / Width / Height 578 / 303 / 318 mm

Scope of supply

Semi-hermetic four cylinder reciprocating compressor with drive motor

Single-section compressor housing with hermetically integrated electric motor

Oil pump

Motor is cooled by an integrated ventilator with air deflection hood.

230 V - 1 - 50/60 Hz, 38 W, 0,17 A

Winding protection with PTC resistor sensors and electronic trigger unit INT69 G

115-230 V AC, 50/60 Hz, IP00

Possibility of connection of oil level controllers ESK, Traxoil, AC+R or CARLY 4)

Oil charge:

HA: BOCKlub A46

HAX: BOCKlub E55

Sight glass

Suction and discharge line valve

Inert gas charge

4 anti-vibration pads enclosed

Accessories

Start unloader by means of a ESS (Electronic Soft Start), 400 V - 3 - 50/60 Hz, IP20 (Connection clamps IP00) for installation in switch cabinet

Digital capacity regulator DCR14 230 V - 1 - 50/60 Hz, IP65

1 digital capacity regulator = 50% residual capacity

Cylinder cover prepared for digital capacity regulator

Oil sump heater

110-240 V - 1 - 50/60 Hz, 50-120 W, IP66

PTC heater self-regulating

USB converter for INT69 G Diagnose 5)

Thermal protection thermostat per cylinder cover 6)

Oil pressure safety switch MP55 230 V - 1 - 50/60 Hz, IP20 5)

INT69 G Diagnose 115-230 V AC, 50/60 Hz, IP00 (INT69 G not applicable)

DP-Modbus Gateway 115-230 V AC, 50/60 Hz, IP00 including adapter cable 5)

Modbus-LAN Gateway 230 V AC, 50/60 Hz, IP00 5)

Step protection

Special voltage and/or frequency (on request)

Notes

1) Tolerance (± 10%) relates to the mean value of the voltage range. Other voltages and current types on request

All data are based on voltage rms values

2) - The stated value for the max. power consumption is valid for the adjusted power supply.

- Starting current (rotor blocked):

Part winding (PW) motors: Winding 1 / Winding 1+2

Delta/Star (Δ/Y) motors: Δ / Y

- Take account of the max. operating current / max. power consumption for designing fuses, supply lines and safety devices. Fuse: Consumption category AC3.

3) LP = Low pressure

HP = High pressure

4) Only with additional adapter possible

5) Enclosure

6) Mounted