水利工程泵@桥东水利工程泵@水利工程泵300S19

Thus the centrifugal force is generated, under the action of centrifugal force, the liquid is dumped along the Blade Runner to the impeller outlet, and the liquid is collected and fed into the discharge tube through the worm shell. The liquid obtains energy from the impeller, increasing the pressure energy and speed energy, and relies on this energy to transport the liquid to the place of work. When an impeller does not allow the liquid to obtain sufficient energy, multiple impellers can be used in series or in parallel to work on the fluid. At the same time that the liquid is dumped to the impeller outlet, a low pressure is formed at the center of the impeller Inlet, and the pressure difference is generated between the liquid in the suction tank and the center of the impeller, and the liquid in the suction tank is continuously operated into the impeller under the action of this pressure difference. In this way, the impeller in the rotation process, one side of the constant liquid, while constantly giving the liquid with a certain amount of energy, the liquid discharge, so that the centrifugal pump work continuously. The medium-open pump is mainly composed of pump body, pump cover, sealing ring and rotor parts. Rotor parts are mainly composed of shafts and impeller mounted on the shaft, impeller retaining sleeve.

S、SH单级双吸中开式离心泵产品特点1、密封系统：可供选用的机械密封、填料密封其冷却润滑均采用内循环；2、流量大、效率高：双吸叶轮，具有流量大、效率高等特点；3、可更换的轴套：轴套作为易损件，起到保护轴，提高泵的使用寿命；4、密封环：密封环作为易损件，起到提高泵的效率、延长泵的使用寿命的特点。S、SH单级双吸中开式离心泵产品用途

水利工程泵@桥东水利工程泵@水利工程泵300S19

S Series Open Pump is a large number of general-purpose machinery and equipment, it is widely used in petroleum, chemical, power metallurgy, mining, ship selection, light industry, agriculture, civil and national defense departments, in the national economy occupies an important position. For this reason, the cavitation problem of the open pump in the S series refers to the pressure of the open pump at the entrance of the P1 equal to or less than the saturated vapor pressure PV of the liquid at the same temperature, the liquid vaporization, the bubble under high pressure, rapid condensation or rupture to produce a very high pressure, highly frequent impact, the pump body strong vibration and noise, And significant reduction in efficiency. Then, in the S series, the pump must reduce the cavitation allowance of the pump itself in order to prevent cavitation. There are several specific methods. Reduce the suction height or increase the height of the inversion, reduce the loss, for this reason, we can try to increase the pipe diameter, minimize the length of the pipeline, elbow and accessories, etc., the cavitation will increase during the operation of the medium open pump, so it is necessary to prevent the water from running under large flow for a long time.

S、SH单级双吸中开式离心泵概述

我公司以用户效能为宗旨，以商场要求为政策，创一流质量，树一流诺言的准则，竭诚欢迎各地新老用户选购会泉水泵，公司广大职工以热心优质的效能等候各地的新老用户莅临。考虑未来行业应用的可能，中高端工业机器人将在汽车产业、通信电子、金属制品、化工塑料、家电行业等有较为广泛及深入的应用，说，过去使用的数控、工业机器人，基本上是按人设定的程序作业，并没有人工智能。过去10年间，在半导体显示产业链投资建设上投入了大量资源。实现进口替代的公司器械国产化及进口替代是政策重点鼓励的方向。三、交流展会的意义不仅在于可以展示自己的产品，还在于你能去看别人展出的产品。