NI-ROD^? 99 焊丝

NI-ROD 99焊丝主要用于熔化极气体保护焊、钨极惰性气体保护焊和埋弧焊等方法焊接球墨铸铁、可锻铸铁、灰口铸铁等，这是一种实芯镍基焊丝，能使焊缝的自动或半自动机械加工更加容易。焊接铸铁时，在单层高熔覆率的情况下，用纯镍焊接材料形成的焊缝较其它焊接材料形成的焊缝有更好的机械性能。用NI-ROD 99焊丝进行埋弧焊时应使用INCOFLUX 6焊剂。

NI-ROD 99焊丝还可用于气体保护焊以将铸铁和低合金钢或碳钢焊接在一起。

    焊丝可以以线卷或直线状供货，并有几种不同直径可供选择，如下表所示

产品    

供货

状态

直线长度--915 mm(36”)或1000 mm(39”)

NI - 99 wire ROD is mainly used for melting pole gas protection welding, tungsten inert gas protection welding and submerged arc welding welding nodular cast iron, malleable cast iron, grey cast iron, etc., it is a solid core nickel-based welding wire, can make weld automatic or semi-automatic machining easier. In the case of welding cast iron, the weld of pure nickel welding material has better mechanical properties than that of other welding materials. INCOFLUX 6 flux should be used when welding wire with NI-ROD 99.

Ni-rod 99 welding wire can also be used for gas shielded welding to weld cast iron and low alloy steel or carbon steel.

Specification of AWS A5.15 erni-ci ISO S C ni-ci

UNS N02215 Europe S C Ni-CI

ASME Ⅱ, SFA 5.15, ERNi - CI

Nia -- -- -- -- -- -- -- -- -- -- -- -- 99.0 min Cu -- -- -- -- -- -- -- -- -- 0.25 Max

Chemical Fe -- -- -- -- -- -- -- -- -- -- - 0.40 min C -- -- -- -- -- -- -- -- -- -- - 0.15 Max

Ingredients Mn -- -- -- -- -- -- -- -- -- -- - 0.35 Max S -- -- -- -- -- -- -- -- -- -- - 0.01 Max

Si -- -- -- -- -- -- -- -- -- -- - 0.35 Max other -- -- -- -- -- -- -- -- -- 1.00 Max

Add a Co

Typical tensile strength, psi 71,000

Mechanical 490 MPa

Performance extension rate (4d) % 12

The wire can be supplied in a reel or straight line, with several different diameters to choose from, as shown in the table below

products

Mm 0.8 0.9 1.0 1.14 1.2 2.4 3.2

In 0.030 0.035 0.040 0.045 0.035 0.062 0.093 0.125

supply

state

Linear length -915 mm(36 ") or 1000 mm (39)