韩国高丽K-700HT耐磨堆焊药芯焊丝价格用途
|
|
|
K-329T
|
|
E2209T1-1/4
|
|
-
|
|
-
|
|
K-329T is formulated for MAG welding of 23%Cr-9%Ni-3%Mo duplex stainless principal area of application is chemical plant and shipbuilding as well as nuclear plant industries.
|
|
|
|
|
K-347T
|
|
E347T1-1
|
|
YF347C
|
|
YF347C
|
|
K-347T is formulated for MAG welding of 18%Cr-8%Ni-Nb stainless steels.
|
|
|
|
|
K-409TiT
|
|
EC409
|
|
-
|
|
-
|
|
K-409TiT is developed to meet the needs of the auto-motive exhaust fabricators that desired a metal cored wire. It excels in the pulsed GMAW mode.
|
|
|
|
|
K-410T
|
|
E410T0-1/-4
|
|
YF 410C
|
|
YF 410C
|
|
K-410T is designed for MAG welding of martensite stainless alloys of the 13%Cr types. It is used for surfacing of sealing faces of valves for gas,water, and steam piping system at service temperatures up to 450∑
|
|
|
|
|
K-410NiMoT
|
|
E410NiMoT0-4
|
|
-
|
|
-
|
|
K-410NiMoT is designed for MAG welding of soft-martensite stainless alloys of the 13%Cr-4%Ni-Mo types.
|
|
|
|
|
K-430T
|
|
E430T0-G
|
|
YF430G
|
|
YF430G
|
|
K-430T is designed for MAG welding of ferrite stainless alloys of the 17%Cr-Ti types. It is suitable for automotive exhaust fabricators such as front pipe, bellows, flange,
|
|
|
|
|
K-436T
|
|
-
|
|
-
|
|
-
|
|
K-436T is designed for MAG welding of stainless steels of the 17%Cr-1% Mo-Ti types. It is suitable for automotive exhaust fabricators such as front pipe, bellows, flange,
|
|
|
|
|
K-439T
|
|
-
|
|
-
|
|
-
|
|
K-439T is designed for MAG welding of stainless steels of the 18%Cr-1%Ti is suitable for automotive exhaust fabricators such as front pipe, bellows, flange,
|
|
|
|
|
K-309LF
|
|
E309LT0 -1/-4
|
|
YF309LC
|
|
YF309LC
|
|
K-309LF is designed for MAG welding of low carbon 22%Cr-12%Ni stainless steel. Dissimilar joint welds ; of and between high-strength, mild steels and lowalloyed QT-steels, stainless, ferritic Cr-and austenitic Cr-Ni-steels, manganese steels. Cladding ; for the first layer of corrosion resistant weld claddings _disibledevent='center'> 汽车消声器用金属粉型16%Cr-Ti不锈钢
|
|
药皮型式型号直径（mm）相当规格焊接位置电流类别焊道金属化学成分的化验值（%）CSiMnCrNiMo低氢
（Low hydrogen type）KK-50LF2.6~6.0AWS E7016
JIS D5016F,V,OH,HAC/DC( )0.080.571.02------KK-552.6~6.0AWS E8016-G
JIS D5316F,V,OH,HAC/DC( )0.080.501.20------KK-602.6~6.0AWS E9016-G
JISN D5816F,V,OH,HAC/DC( )0.070.581.04--0.640.26KK-702.6~6.0AWS E10016-G
JIS D7016F,V,OH,HAC/DC( )0.080.371.05--1.870.40KK-802.6~6.0AWS E11016-G
JIS D8016F,V,OH,HAC/DC( )0.070.600.43铁粉低氢（Low hydrogen,iron powder type）K-70182.6~6.0AWS E7018
JIS D5016F,V,OH,HAC/DC( )0.070.570.97------K-7028LF4.5~6.4AWS E7028
JIS D5026F,H-FilAC/DC( )0.070.520.98------K-80182.6~6.0AWS E8018-G
JIS D5316F,V,OH,HAC/DC( )0.060.541.08--0.310.20K-90182.6~6.0AWS E9018-M
JIS D5816F,V,OH,HAC/DC( )0.070.50.20K-10018M2.6~6.0AWS E10018-M
JIS D7016F,V,OH,HAC/DC( )0.070.461.350.141.630.28K-11018M2.6~6.0AWS E11018-M
JIS D8016F,V,OH,HAC/DC( )0.080.411.490.321.860.32K-12018M2.6~6.0AWS E12018-MF,V,OH,HAC/DC( )0.080.301.460.981.860.41焊道金属化学成分的化验值（%）主要用途认可降伏强度N/mm2
（kgf/mm2）抗拉强度N/mm2（kgf/mm2）延伸率（%）冲击值（kgfm）480[49]560[57]32140[14](-29℃)适合于焊接高温用钢铁,主要在发展用管道和锅炉制造业上使用. 540[55]600[61]28130[13](-29℃)适合于焊接造船,桥梁,建筑物用540N/mm2级高拉力刚. 550[56]650[66]29140[14](-29℃)适合于焊接压力容器,桥梁,车辆和机械用590N/mm级高拉力钢. 640[65]730[74]26120[12](-29℃)适合于焊接压力容器，桥梁，压力钢管用690N/mm2级高拉力钢。 730[74]830[85]22700[7](-29℃)适合于焊接压力容器，桥梁，压力钢管用790N/mm2级高拉力钢。 480[49]570[58]3090[9](-29℃)适合于焊接桥梁，建筑物，压力容器用490N/mm2级高拉力钢。ABS,BV,DNV,GL,KR,LR,NK,470[48]550[56]31130[13](-18℃)平焊和横向角缝焊接的熔敷系数很高，如同490N/mm2级高拉力钢的深槽式结合。ABS,BV,DNV,GL,KR,LR,NK,JIS490[50]590[60]28150[15](-29℃)适合于焊接桥梁，造船，压力容器540N/mm2级高拉力钢。ABS,JIS570[58]670[68]3090[9](-51℃)适合于焊接一种拉力为2低合金高拉力钢。 640[65]750[68]2970[7](-51℃)适合于焊接一种拉力为2低合金高拉力钢。 720[73]820[84]2360[6](-51℃)适合于焊接一种如HY80那样拉力为大约780N/mm2低合金高拉力钢。 810[82]950[97]2050[5](-51℃)适合于焊接以汇总为890N/mm2低合金高拉力钢。
药芯焊丝（Solid wires）
应用型号直径（mm）相当规格焊接位置保护气体电流类别焊道金属化学成分的化验值（%）CSiMnCrMo低合金钢（Low slloy steel）KC-80D21.8~1.6AWS ER80S-D2
JIS YGM-CF,V,OH,HCO2DC( )0.110.321.24--0.48ZO-551.8~1.6AWS ER70S-G
JIS YGM18F,V,OH,HCO2DC( )0.070.781.55----ZO-601.8~1.6AWS ER80S-G
JIS YGM21F,V,OH,HCO2DC( )0.070.591.47--0.28焊道金属机械性能的化验值（%）主要用途认可Ni降伏强度N/mm2（kgf/mm2）抗拉强度N/mm2（kgf/mm2）延伸率（%）冲击值J（kgfm）--590[60]660[67]2250[5](-29℃)适合于0.5%Mo钢的焊接 580[59]640[65]27170[17](-29℃)用于碳钢及540Mpa级高强钢的对接和角焊接，如施工设备，桥梁和建筑。 --550[56]640[65]27110[11](-18℃)适合于590%N/mm2抗拉力的焊接。NK,JIS
药芯焊丝（Flux cored wires）
应用型号直径相当规格焊接位置保护气体电流类别焊道金属化学成分的化验值（%）CSiMoCrNi高强钢（For high tecsile strength steel）K-81T1.2~1.6AWS E81T1-Ni
JIS YFW-C602RF,V,H,H-FilCO2DC( )0.0450.351.17--1.0K-82T1.2~1.6AWS E81T1-Ni2F,H-Fil,VCO2DC( )0.030.481.26--2.04KX-3001.2~1.6AWS E80T1-Ni1
JIS YFW-C602MF,H-F,ilCO2DC( )0.020.471.34--0.97K-91T1.2~1.6AWS E91T1-Ni1
JIS YFW-602RF,V,OH,H,VDCO2DC( )0.030.421.37--2.04K-110TK31.2~1.6AWS E110T1-K3F,H-Fil,VDCO2DC( )0.040.511.72-- 焊道金属机械性能（%）主要用途认可Mo降伏强度N/mm2（kgf/mm2）延伸率（%）冲击值J（kgf/mm2）0.2570[58]2845[5](-30℃)590N/mm级高拉力钢结构和桥梁，机械和贮槽的各种位置MAG焊接。 0.2548[56]24.145[5](-40℃)低问焊590帕级别的焊铝钢：含2%镍零下40度缺口冲击值好。 --640[65]2547[5](-30℃)适合于造船，海洋平台，建筑机械，桥梁，钢结构590N/mm2级平焊专用焊材。 --725[74]2287[9](-30℃)630N/mm2高强力钢平焊及平角焊专用焊材。
