NICROMANG® PLUS COATED

NICROMANG®+涂

STOODY NICROMANG PLUS is similar to Stoody NicroMang except it is formu-

STOODY NICROMANG +类似STOODY NICROMANG formu -除外

lated to produce a higher hardness in the “as-welded” condition. This higher

迟来的生产高硬度的“焊接状态”状态。这个更高

hardness will reduce the amount of initial metal deformation under heavy loads.

硬度会减少初始金属变形下沉重的负荷。

NicroMang Plus is not recommended for buildup on carbon steel.

NicroMang +不推荐对碳钢积聚。

Welding Procedures/Characteristics: Can be applied AC or DC, either polarity

焊接程序/特点:可以应用交流或直流极性

(reverse preferred) using stringer or weave beads. Weldability is good in the flat

(反向首选)使用纵桁或编织珠子。可焊性良好的平的

and horizontal positions. Multiple layers can be applied without difficulty when

和水平位置。当多层可以应用没有困难

proper procedures are followed. Maintain low heat input, do not exceed 500

遵循适当的程序。保持低热量输入,不超过500

degrees interpass temperature and peen with the flat face of a hammer, when

度层间温度与平面的锤子,锤头的时候

possible, to relieve weld stress.

可能,减轻焊接压力。

Applications: Manganese Railroad Frogs and Crossings, Manganese Steel

应用程序:锰铁路青蛙和口岸,锰钢

Castings

铸件

Typical Chemical Composition:

典型的化学成分:

Alloy Content – 23% (Manganese, Chromium, Carbon, Molybdenum,

合金含量- 23%(碳、锰、铬、钼、

Nickel)

镍)

Iron Base

铁基