Category
类 别
|
Trade-
mark
牌 号
|
Chemical
composition
化学成份(%)
|
Hardness
硬 度
|
Application
用 途
|
Oxy-
Acetylene
Flame
spray-
using
氧
乙
炔
焰
喷
焊
|
F103
|
Cr10 B1.5 Si3 Ni Rem.
|
HRc 25
|
Spray-fusing of cast iron parts, such as die for glass, cylinder, and guide.
铸铁件的喷焊，如玻璃模具，汽缸、导轨
|
F101
|
Cr10 B2.5 Si3 Ni Rem.
|
HRc 45
|
Spray-fusing of parts resistance to wear and corrosion, such as valve, the rotator and piston of pump.
耐磨、耐蚀件的喷焊，如阀门、泵转子、泵柱塞
|
F101Fe
|
Cr10 B2.5 Si3 Fe10
Ni Rem.
|
HRc 45
|
Spray-fusing of corrosion-resistant parts, such as axle and stigma.
耐磨件的喷焊，如轴类、汽门
|
F102
|
Cr16 B4 Si4 Ni Rem.
|
HRc 60
|
Spray-fusing of parts resistance to wear, corrosion and high temperature oxidation, such as die and piston.
耐磨、耐蚀、抗高温氧化工件的喷焊，如模具、柱塞
|
F102Fe
|
Cr16 B4 Si4 Fe15
Ni Rem.
|
HRc 60
|
Spray-fusing of corrosion-resistant parts, such as axle and cold die.
耐磨件的喷焊，如轴类、冷模具
|
F105
|
F102+50%WC
|
HRc 60
|
Spray-fusing of parts resistance to grain-wear , such as guide plate, scraper and blade of fan.
抗磨粒磨损场合的喷焊，如导板、刮板、风机叶片
|
F105Fe
|
F102Fe+35%WC
|
HRc 60
|
Spray-fusing of parts resistance to grain-wear, such as guide plate, scraper and blade of fan.
抗磨粒磨损场合的喷焊，如导板、刮板、风机叶片
|
F108
|
F102+80%WC
|
HRc 60
|
Spray-fusing of parts resistance to strong grain-wear and free machining, such as harrow teeth of dredger.
抗强烈磨粒磨损，无需加工场合的喷焊，如挖泥船耙齿
|
F301
|
Cr5 B4 Si4 Ni30
Fe Rem.
|
HRc 45
|
Spray-fusing of vulnerable parts of agricultural machinery and mining machinery, such as gear and axletree.
农机,矿山机械易损件的喷焊，如齿轮，车轴
|
Track iron powder
轨铁粉
|
Cr5 B1.5 Si3 Ni30
Fe Rem.
|
HRc 28
|
Repair spray-fusing of defects such as scratch and concavity of railroad track.
铁路钢轨擦伤、低塌等缺陷的修复喷焊
|
|
Oxy-acetylene flame spraying
氧
乙
炔
焰
喷
涂
|
F111
|
Cr5 B1.5 Si3 Ni30
Fe Rem.
|
HB 150
|
Spraying of bearing and cutting parts etc.
轴承、切削件等的喷涂
|
F113
|
Cr10 B1.5 Si3 Ni Rem.
|
HB 250
|
Spray-fusing or spraying, such as roll, piston and axle of wear and corrosion resistance.
喷涂亦可喷焊，如滚筒、柱塞、耐蚀耐磨轴等
|
F313
|
Cr15 B1.5 Fe Rem.
|
HB 250
|
Spraying of dryer of papermaking and axle.
造纸烘缸、轴类的喷涂
|
F314
|
Cr18 Ni9 B1.5 Fe Rem.
|
HB 250
|
Spraying of axle.
轴类喷涂
|
F412
|
Sn10 P0.3 Cu Rem.
|
HB 80
|
Spraying of axle and bearing.
轴、轴承的喷涂
|
F512
|
复合Al5Ni95
|
|
Backing spray of transition layer between base and working layer.
喷涂层的基体与工作层之间过渡（打底）层用喷涂
|
|
PTA
hardfacing
等
离
子
弧
喷
焊
|
F221
|
Cr26 W5 B0.7 Co Rem.
|
HRc 43
|
PTA hardfacing of sealing surface of high temperature and high pressure valve and the edge of hot shearing tool.
高温高压阀门密封面、热剪切刃口的等离子喷焊
|
F223
|
Cr21 W5 B1.5 Co Rem.
|
HRc 40
|
PTA hardfacing of parts resistance to wear and corrosion at high temperature, such as valve under high temperature and high pressure, and blower.
高温下耐磨耐蚀件的喷焊，如高温高压阀门、鼓风机
|
F321
|
Cr13 B1.5 Si1 Fe Rem.
|
HRc 45
|
PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as stop-plate etc.
中温中压阀门的闸板及其他耐磨件的等离子喷焊
|
F322
|
Cr23 Ni13 Si5 B1
Fe Rem.
|
HRc 40
|
PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as valve base etc.
中温中压阀门的阀座及其他耐磨件的等离子喷焊
|
F422
|
Sn10 P0.3 Cu Rem.
|
HB 80
|
PTA hardfacing of axle and bearing etc.
轴、轴承等离子喷焊
|
