Westermo总代理 Lynx L+110 网管型以太网交换机
Westermo总代理 Lynx L+110 网管型以太网交换机
产品价格:¥1(人民币)
  • 规格:Lynx L+110
  • 发货地:上海
  • 品牌:
  • 最小起订量:1台
  • 免费会员
    会员级别:试用会员
    认证类型:未认证
    企业证件:未通过
    认证信息:未认证

    商铺名称:上海安跃电气有限公司

    联系人:贺杰(先生)

    联系手机:

    固定电话:

    企业邮箱:andyheluck@139.com

    联系地址:上海市洛川东路285号东方明珠欧洲城

    邮编:20136

    联系我时,请说是在焊材网上看到的,谢谢!

    商品详情
      Lynx  100
      i1804.jpg

      The managed Lynx 300 fulfils the toughest industrial environmental requirements. The Fast Re-configuration of Networks Topology (FRNT) concept offers ultra fast reconfiguration (30 ms) of the network topology. The FRNT concept eliminates failures caused by network links and/or switches. Management of the switches are easy and is done by the user in the Windows based IP Configuration tool. The tool is free and any of the Ethernet ports can be used for this purpose. Thus, no serial port is required for setting the configuration parameter on the switch. This means that the Lynx switch can be mounted and installed prior to configuration. High MTBF numbers makes it the choice for applications where temperature, vibration and insulation are critical parameters. Lynx switches are approved for industrial, maritime and railway use as well as for substation automation.
      FRNT v0: Single Ring topology
      -30 ms reconfiguration of Redundant Ring
      -Up to 200 switches supported in a Ring
      IP Configuration tool for configuration of:
      -Port setting (auto-negotiation, HDX/FDX and 10/100 Mbit/s)
      -Port alarm configuration.
      Real time Ethernet:
      -QoS based on layer 2 (IEEE802.1p) and layer 3 (IP ToS)
      -Four priority queues
      -Strict priority scheduling
      -Head of Line blocking prevention for low priority packets
      True industrial specification
      -Military design
      -Full metal housing
      -IP40
      -Wide temperature range (–40°C to +70°C)
      -Wide DC power range (19 to 60 VDC)
      -No moving parts or electrolytic capacitors
      -Low power consumption (Typical 5 W for no fibre version, 5,7 W for one fibre transceiver and 6.4 W for two fibretransceivers)
      -Redundant power input with polarity protection
      -Input Power Monitoring
      -High MTBF numbers
      -Approved for industrial use
      -DNV approved for marine use
      Auto MDX/MDIX technology to simplify switch connection
      Supports long cable 150 m (CAT5e)
      User configurable fault contact
      SNMP Management
      i1823.gif
    在线询盘/留言
  • 0571-87774297