6 Electric flame monitoring and control units
2-88
 
Module subrack BGT SA for PFA 700/PFU 760 and PFA 710/
PFU 780
consisting of:
module subrack, printed-circuit board with rear terminal strip, function-tested, standard
documentation, guide rails, without partial front plates, screw terminals at the rear, relays
and screw terminals for four free inputs and four free outputs, connection to PROFIBUS
DP with D-Sub socket.
BGT SA-9: slot 1 for PFA 700, slots 2-10 for PFU 760,
BGT SA-8: slot 1 for PFA 710, slots 2-9 for PFU 780
Designation Order no.
BGT SA-9U/1 DP700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84402291
BGT SA-8U/1 DP710 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84402292
Impulse system MPT 700
For all gas-fired heat-treatment furnaces where recirculation of the furnace atmosphere
ensures a constant temperature distribution, thereby allowing shorter heating-up periods. For converting a controller signal to switch-on/switch-off times for gas burners in
the case of intermittent operation, linear response between actuating signal and burner
capacity, control of up to 8 burners, various operating modes, single- and two-zone
operation, mains voltage: 110-240 V AC, 50/60 Hz.
Designation Order no.
MPT 700A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84395050
Module subrack BGT SM-8U/1/1 for MPT 700 and PFU 760,
PFU 780
consisting of:
module subrack, printed-circuit board with rear terminal strip, function-tested, standard documentation, guide rails, without partial front plates, screw terminals at the rear,
single-zone operation for MPT 700 operating modes 1-4, two-zone operation for MPT
700
operating modes 1-4, but max. 4 burners per zone.
Slot 1 for MPT 700, slots 2 – 9 for PFU 760 or PFU 780, slot 10 for PFP 700
Designation Order no.
BGT SM-8U/1/1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84402282
Other versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . on request
Accessories for 19" boards
Designation Order no.
Rack-mounted fan modules
19" rack-mounted fan module 3U/84HP, 115 V AC . . . . . . . . . . . . 04065415
19" rack-mounted fan module 3U/84HP, 230 V AC . . . . . . . . . . . . 04065416
For PFx 7xx
Socket connector E, 48-pin solder tag connection . . . . . . . . . . . . 04120148
Socket connector E, 48-pin wire-wrap connection . . . . . . . . . . . . 04120158
For MPT 700
Socket connector F, 48-pin solder tag connection . . . . . . . . . . . . . 04120143
Socket connector F, 48-pin wire-wrap connection . . . . . . . . . . . . . 04120142
Customized 19’’ module subrack 3U/84HP for PFU, PFF,
PFR, PFP and MPT 700
Module subrack for Kromschr?der process firing systems of the series 700 (PFU, PFF,
PFR, PFP and MPT 700), consisting of: module subrack, customized wiring (wire wrap)
with rear terminal strip, function check, customer-specific documentation, guide rails
and where necessary partial front plates, also in wall-mounted housing for electronics.
BGT
MPT 700 Brochure MPT 700
BGT
6 Electric flame monitoring and control units
2-89
Burner control units BCU 370
Type code